Codes & Commissioning

Commissioning & Handover Checklist

Prepare the records, contacts, and training arrangements needed for a documented handover.

For facility managers, project managers, maintenance leads, and commissioning teams.

Agree on acceptance before installation is complete

Define the approved sequence of operation, commissioning scope, responsible parties, and required documentation before the site is ready for startup. The project team should understand what will be demonstrated, what records will be produced, and who can accept the system.

Have qualified personnel verify the integrated response

Commissioning confirms that the installed bay responds as designed in your building. The responsible specialists verify the applicable detection, exhaust, alarm, interlock, and control functions using the approved project procedure. Do not use a website checklist to simulate a release or change an alarm setting.

Make the operating information usable

Collect the approved drawings, operating instructions, component manuals, maintenance requirements, and commissioning records in a location the facility team can access. Confirm that operators know their training requirements, the site’s response procedure, and who to contact for service.

Close the remaining items

Keep a written list of open items, their owners, and the required follow-up. Confirm the acceptance status with the project team and reviewing officials as applicable. Schedule follow-up maintenance using the equipment manufacturers’ instructions and the approved facility program.

Your planning checklist

0 of 6 gathered

Use this to prepare a project discussion. Checked items are kept only while this page is open.

Identify the commissioning lead and owner’s acceptance representative.Confirm that site work and required inspections are ready for startup.Have the approved sequence of operation and project procedure available.Collect the completed verification records and open-item list.Receive operating instructions, component manuals, and approved drawings.Confirm operator training, service contacts, and maintenance responsibilities.

Download planning workbook (PDF)Text checklist (.txt)

Hydrogen safety references and planning limits

For background on hydrogen properties, detection and facility safety, consult the resources below. These references do not approve a particular installation. Use the codes adopted by your jurisdiction, the approved project design and the vehicle manufacturer’s service procedures.

Planning information from Hydrogen Service Bays, a specialty brand of Marathon Finishing Systems, Inc. About the manufacturer.

Share this post

X LinkedIn Facebook Email